FELIXprinters

Felix 2.0 Fully Assembled

Sold Out out of stock

felix 2.0 first impressions

I've had my felix 2.0 for a couple of weeks, as a complete noob took my time before my first print, got the test print on the second try, took me four goes to print a tardis I found on thingverse (third go failed cos my computer went to sleep mode (wtf?)
Really impressed with the quality and crispness of my prints. A little bit of fiddle, but well worth it.

felix 2.0 first impressions

Happy with my Felix printer

Took delivery of my Felix printer last week after a few weeks of waiting. The printer was well packed with lots of bubble wraps around it. I then spent a couple of hours going through the manual, setting up the software, fine-tuned the nozzle and the traverses. All checked well and I had a good printout in my second go. The bed and nozzle temperatures were set too low at first. Overall, quite happy with the Felix printer out-of-box.

Happy with my Felix printer

The Felix 2.0 features-

* More reliable printing of large object due to very even heat distribution of heated bed.
* Stand-alone printing out of the box, no constant need of a computer.
* Higher quality prints.

NEW innovations

Foil heater for heated bed with integrated thermistor, very even heat distribution over whole print-surface. No more soldering/fiddling your components onto the heated bed, it is just a sticker mounted in 2 minutes. Saves at least one hour of assembly time.
* Z-axis completely revised. With new vertical linear ball bearing which like the x and y-axis has no play and friction.
* Precision machined trapezium lead screw
* Linear ball bearing guide
* Increased z-stroke enables a print height of 235mm
* All delivered components have longer wires, so no more soldering required, just cut them to length and screw them onto the electronics board.

New Electronics

* Industrially fabricated electronics, which increases reliability
* Only high quality components used, which require less cooling. Fan is not required anymore.
* Prepared for dual extrusion.
* Z-axis fine-adjustment, more robust and repeatable.

This is the fully assembled variant of the Felix 3.0 made by FELIXprinters (Netherlands). (A complete DIY Kit version is also available here). This printer now includes a 1kg roll of PLA filament.

The Felix 2.0 3D Printer is an fast, durable and reliable. Years of experience in the field of high precision mechatronics and industrial automation have led to this design. Stand out features include:

Ultra Fine Resolution. This printer can print down a Z height of 0.05mm thats 50 mircrons!
Large Build Size. It includes a255x 205x235mmbuild platform, over 12.2 litres.
Rigid construction. The aluminum frame is strong can withstand the high accelerations of the moving parts. This equates to high quality prints
Quiet operation. Due to the rigid frame, bearing type and low noise fans you can enjoy your prints come to life in peace.
Reliable. Engineered with durability in mind, which keeps you printing for many many hours.
Easy to calibrate.The components are not mounted in an over defined way, this gives you short calibration time and get's you printing faster.

images courtesy of Creative Tools

Features

High Accuracy: Minimum layer height of 50 micrometer (0.05mm) guaranteeing detailed prints.
Quiet Operation: Due to rigid frame choice and bearing type, the printer is very quiet. This makes it possible to use it comfortably on your desk
Durability: Only high quality and durable materials are used (aluminum and stainless steel). This ensures long lasting printing experience.
Easy Calibration/Maintenance:Due to the open and smart design the parts are easily accessible
Portable: The convenient handle makes it possible to take it everywhere.
Compatible with almost every CAD package: The software used to calculate a CAD file requires STL files, this is a format which almost every CAD package can export.
Download and print upgrades for Free: As much as possible and sensible parts are printed parts. This makes it possible to have very quick update cycles and maintain topnotch print performance. All printable upgrades can be downloaded and printed by the user. The files are already prepared so you can just download and print them.
Easy to use Print Software:Uses Repetier-host and comes with precalibrated Print Settings specifically for Felixprinters. It is now very userfriendly. Just install with the automatic installer and you are ready to go make your first print. - Slicing profiles included out of the box.

Main specifications:

Print volume / build size (X,Y,Z)	(255x 205x235) 12.28 LITRES	mm
Frame size (X,Y,Z)	(450x500x530)	mm
Resolution (Z-AXIS)	0.05 - 0.35	mm
Accuracy	0.05	mm
Print Speed	150	mm/sec
Total mass	6.7	kg
Nozzle diameter	0.35	mm
Filament Diameter	1.75	mm
Filament Material	ABS, PLA, Nylon, Arnitel
Slicing Software	Repetier Host, Slic3r Pronterface
OS Support	Windows / Mac
Print without PC (New)	YES
New Improved Heated Bed included
Optical endstop sensors
1 kg PLA filament included with printer

Lead time - new shipment arriving, ETA mid December!

The printer is designed in the following modules:

Frame module:

Extruded aluminum frame parts
Easy connectors, the frame is assembled by screwing 6 hex bolts

X (moving head) and Y (moving table) module:

Drylin-sliding bearing
Printed parts
Toothbelt
Pulley
Opto-sensor
NEMA 17 motor
Heated bed

Z-axis module:

Drylin-sliding bearing
Printed parts
Spindle
Opto-sensor
NEMA 17 motor

Extruder/Hot-End module:

Hot End
2x Fan
NEMA 17 motor

Electronics module:

RAMPS 1.4 electronics
4x opto-sensors
3m USB cable
Power cable
Fan

Miscelleaneous parts:

Tie wraps
Bolts and nuts
Handle
12V 250W Powersupply FlexATX

The well respected MAKE magazine 2013 reviewed and and praised FELIXprinters for the following features:
- Extremely quiet
- Large build volume
- Fine Z resolution
- Rigid aluminum frame,
- Good retraction for near-stringless builds
- Speedy printer

Make magazine just awarded the title Surprise hit of 2014 for the FELIX 2.0, but they didn't even seen the FELIX 3.0 yet!

Verified Customer Reviews

Based on 2 reviews Write a Review!

Should have bought anything else.

I have not been able to use the printer. It keeps jamming in the print head. I have heated the print head but can't clear it. Tried to remove screw but it's blurred so can't remove it and no I didn't hurt it. It currently sits as a paper wait on my desk waiting for a reply from qidi support which has been over a week.

QIDI Plus 4. Fantastic!

Fired it up and decided to quickly print a benchy.

Wow! I couldn't stop checking it out. It only took 13 minutes and it is the best benchy I have ever printed. I have 5 Printers, including a Creality K1 Max and none of them came close to this one.

Since then it has been working its butt off and I am super impressed. I thought the K1 Max was unbeatable for the price but this is much better and less expensive.

Its print head heat range and chamber warming means you can print many different filaments making it much more versatile than most of its competitors and the ability to print multiple colours is coming in early 2025, meaning it will more than favourably compete with both the Creality K2 and the Bambu range, especially pricewise.

Really easy to set up and really easy to use. I recommend it whether you're a novice or running a print farm. You will definitely not be sorry you purchased this unit.

Gary O'Connor

Hypa PLA Black

This product worked fine so far. it's not what I was supposed to get as I wanted PLA-CF. My only issue is the cardboard spools. I managed to get by by not using the AMS.

Fast postage ! Great service

A great intro device to 3D printing

I love it, the 5M pro, super easy to setup and use with default settings which allows you heaps of time to learn and adjust the device settings to maximise its output quality with out the frustraion of failed prints.

Felix 2.0 Fully Assembled

Customer Reviews

Features

Verified Customer Reviews

Related Items

Recently Viewed

Customer Reviews

Join us and subscribe...

Let customers speak for us