Skip to content

Australian School & Government Purchase Orders Welcome

Forrmlabs Form Wash + Cure
Formlabs

Form Studio Wash+Cure

The Complete Non-Resin Contact Solution

What is the Form Studio Wash+Cure?

Form Studio Wash+Cure is an all-in-one, compact, and affordable post-processing unit that handles both washing and curing for your resin 3D prints.

Load video: Form Studio 1 WASH+CURE washing cycle

 Washing Mode:

All resin 3D printed parts need washing to remove residual resin. Form Studio Wash+Cure agitates IPA or alternative solvents around parts for thorough, efficient cleaning. When washing is done, simply raise the internal basket out of the solvent to let parts air-dry and avoid over-soaking, warped prints.

Compatible with IPA, TPM, and Formlabs Resin Washing Solution.

Load video: Form Studio 1 WASH+CURE curing cycle

 Curing mode:

Using 405nm light, Form Studio Wash+Cure completes the chemical reaction started during printing. Post-curing boosts part strength, toughness, heat resistance, and creep resistance, while leaving a harder, less tacky surface.

 

Post-Processing Simplified.  

Two Functions, One Machine

Form Studio Wash+Cure washes and cures in a single unit, so a full post-processing setup takes one spot on the bench instead of two.

For Studio Studio 1 Complete School Bundle

 VOC Extractor

The VOC Extractor is a Formlabs extracts and filters resin VOCs through the exhaust port on the back of the printer. When used with Form Studio 1 and Alpha Resins, the ecosystem meets UL Greenguard Gold standards.

Form Studio 1

Professional Resin 3D Printier For Anyone.

Form Studio Wash+Cure  

Form Studio Wash+Cure is an all-in-one, compact, and affordable post-processing unit that handles both washing and curing for your resin 3D prints.

Professional results without professional complexity.

Stage One

Wash

Load parts directly on the build platform or into the basket. 

A magnetically coupled impeller agitates the solvent to remove uncured resin. Raise the basket at the end of the cycle to dry.

Raise the internal basket at the end of the cycle so parts drip and dry without continuing to soak.

Load video: Form Studio Wash+Cure washing cycle
Stage Two

Cure

Drop the glass turntable into the chamber and start the post-cure. Parts rotate under 405 nm light so every face gets the same exposure.

Post-curing completes the chemical reaction started during printing, increasing strength, toughness, heat resistance, and creep resistance, and leaving a harder, less tacky surface.

Load video: Form Studio Wash+Cure turntable
Load video:
Part of the Formlabs Form Studio Ecosystem

99% Print Success. 

How to Get Perfect Prints Every Time with Form Studio 1

Watch the video for the basics of Form Studio 1 and Form Studio Wash+Cure, from software and materials to printing and post-processing.

Form Studio 1 Bundle for Schools
The ideal Bundle for Schools Home and Office

Form Studio Wash+Cure is part of a Formlabs 3D Printing Ecosystem that requires little intervention or maintenance. 

Formlabs

VOC Extractor

Regular price $396.00
Sale price Regular price $396.00

Formlabs

Form Studio 1 -Flex Founders Edition

Regular price $1,809.00
Sale price Regular price $1,809.00

Formlabs

Form Studio Wash+Cure

Regular price $436.00
Sale price Regular price $436.00

Formlabs

Alpha Grey Resin V1 1 Litre

Regular price $82.95
Sale price Regular price
Load video: Material Scientist Answers Most Asked Resin Safety Questions

Technical Specifications

3d print cycle icon

Turntable Diameter 

24.0 cm

intelligent 3d printing icon

Maximum Part Height 

24.5 cm

3d print factor setting icon

Cure Chamber Heater

Non

3d print factor setting icon

Light Source 

24 multi-directional LEDs

3d print layer icon

LED Power 

48 W

3d print layer icon

LED Radiant 

27.84 W

3d print layer icon

LED Wavelength 

405 nm

intelligent 3d printing icon

 Bucket Volume 

10L

3d print cycle icon

Agitation Method 

Magnetically coupled impeller

3d print validation icon

Included Accessories 

a. Wash Basin with Lid

b. Wash Basket

c. Curing Turn Table

3d print validation icon

Compatible Solvents 

IPA, TPM, Formlabs Resin Washing Solution

3d print factor setting icon

Power Requirements 

100–240 VAC

Maximum 1 A

50-60Hz

200 W