Adventurer 5M Pro

$726.36 ex gst $899.00 You Save 19% ($172.64 ex gst)

The Flashforge Adventurer 5M PRO is a highly capable high performance 3d printer which is capable of printing high speeds up to 600mm/s using high temperature engineer materials with a nozzle temperature up to 280°C . With a fully enclosed 220 x 220 x 220mm build volume, a heated bed capable of 110°C. This printer boasts a PEI build plate, an in and out circulating air filter.

Verified Customer Reviews

Based on 1 review Write a Review!

Adventurer 5M Pro

The Flashforge Adventurer 5M Pro is a highly capable high performance 3d printer which is capable of printing high speeds up to 600mm/s using high temperature engineer materials with a nozzle temperature up to 280°C . With a fully enclosed 220 x 220 x 220mm build volume, a heated bed capable of 110°C. This printer boasts a PEI build plate, an in and out circulating air filter. The Flashforge Adventurer 5M can print a large variety of materials and utilises a swapable extruder system which allows you to rapidly change between different nozzles based on your printing needs. Nozzle sizes are available in 0.25mm/ 0.4mm (standard)/ 0.6mm / 0.8mm. With a 280°C maximum nozzle temperature ensures this printer is capable of printing not only in standard materials such as PLA and PETG, but also engineering materials such as ABS and ASA. The hardened nozzles allow you to print in abrasive composite materials such a carbon and glass composite materials such as PLA-CF PETG-CF and PA-CF. You can also print in Flexible materials such as TPU. The Adventurer 5M is fast... very fast. With a standard print speed of 300mm/s and a maximum speed of 600mm/s, it is able to accelerate at 10,000-35,000mm/s2. Print speeds are significantly reduced at these speeds however print quality is maintained. Flashforge has developed high speed printing materials especially optimised to take advantage of this incredible speeds available here- The inclusion of the fully enclosed design, the 110°C heated bed, as well as the 50°C heated chamber combined with circulating air flow help control the warping of engineering materials ensuring dimensional accurate parts through minimised warping. A 4.3" touch screen, wi-fi connection and built in camera ensure you are always well as well informed and effortlessly able to communicate with the printer. The highly tuned FlashPrint slicing software ensures that your printer is well optimised for the various printing materials capable for this machine.

Ready Set Go

The Adventurer 5M Pro with its intuitive touch screen, automated calibration and one click start up. You can be ready to print in 10 minutes.

A 4.3" touch screen, wi-fi connection and built in camera ensure you are
always well as well informed and effortlessly able to communicate with
the printer. The highly tuned FlashPrint slicing software ensures that
your printer is well optimised for the various printing materials
capable for this machine.

Core XY Gantry

The Adventurer 5M Pro is engineered with a solid chassis utilising high quality rails and bearings.

The Core XY Gantry Design ensures the direct drive print head remains stable, high acceleration is achievable whilst maintaining dimensional accuracy and high print quality.

Rigid Core XY gantry ensures high speeds and acceleration

Vibration Compensation

The Adventurer 5M Pro is fast, very fast!Thanks to its rigid Core XY printing frame combined with high heating speed extruderand vibration compensation.

Print Speed up to 600mm/s

Acceleration up to 20000mm/s²

HEPA13 and Activated Carbon Filters

The Adventurer 5M Pro incorporated effective dual filtering of particulates and VOCs both within circulating chamber air as air extracted from the enclosure

Dual Air Flow Filtration

The Adventurer 5M Pro optimises air flow within the build chamber based on the requirements of the printing materials and print speed.

Fresh air circulation for conventional materials and high speed printing. PLA PETG etc.

Circulating chamber air for high temperature materials engineering materials to control warping and strengthen parts. For ABS ASA Nylon etc.enhanced cooling system with strong fans

Flashforge Adventurer 5M interchangable nozzle system

280°C Quick Release Nozzles

Swap a nozzle in 3 seconds!

Direct-Drive Extruder-

Adventurer 5M is equipped with a direct drive extruder, and the upgraded fast-heating nozzle improves the printing of flexible filament.Nozzles in various sizes can swapped out in seconds.

Large Selection of Printing Materials-

PLA/PETG/ TPU and high speed PLA/ PETG（0.4mm nozzles recommended）

ABS/ASA

PLA-CF/PETG-CF （ 0.6/0.8mm nozzles recommended）

Full Automatic Bed leveling

There is no need for leveling tools or manual calibration and adjustment of the Z-axis.

Effortlessly ensure a flawless first layer printing every time.

Advneturer 5M Pro multi point auto leveling

The magnetic remoable print surface is double sided

Double Sided PEI Print Surface

The removable magnetic print surface is coated in PEI and is removable from the printer.

3D Prints can easily be removed safely when cooled.

The bed is double sided, the underside can be used to print PETG whilst the top side can be used for materials such as PLA / ABS and TPU.

QIDI Plus 4. Fantastic!

Fired it up and decided to quickly print a benchy.

Wow! I couldn't stop checking it out. It only took 13 minutes and it is the best benchy I have ever printed. I have 5 Printers, including a Creality K1 Max and none of them came close to this one.

Since then it has been working its butt off and I am super impressed. I thought the K1 Max was unbeatable for the price but this is much better and less expensive.

Its print head heat range and chamber warming means you can print many different filaments making it much more versatile than most of its competitors and the ability to print multiple colours is coming in early 2025, meaning it will more than favourably compete with both the Creality K2 and the Bambu range, especially pricewise.

Really easy to set up and really easy to use. I recommend it whether you're a novice or running a print farm. You will definitely not be sorry you purchased this unit.

Gary O'Connor

Hypa PLA Black

This product worked fine so far. it's not what I was supposed to get as I wanted PLA-CF. My only issue is the cardboard spools. I managed to get by by not using the AMS.

Fast postage ! Great service

A great intro device to 3D printing

I love it, the 5M pro, super easy to setup and use with default settings which allows you heaps of time to learn and adjust the device settings to maximise its output quality with out the frustraion of failed prints.

Great service

Mark was very helpful with advice on which printer to get and how to get started. Highly recommend.

Adventurer 5M Pro

Verified Customer Reviews

Adventurer 5M Pro

Ready Set Go

Core XY Gantry

Vibration Compensation

HEPA13 and Activated Carbon Filters

Dual Air Flow Filtration

280°C Quick Release Nozzles

Full Automatic Bed leveling

Double Sided PEI Print Surface

Join us and subscribe...

Let customers speak for us