Adventurer 5M Pro

$726.36 ex gst $899.00 You Save 19% ($172.64 ex gst)

The Flashforge Adventurer 5M PRO is a highly capable high performance 3d printer which is capable of printing high speeds up to 600mm/s using high temperature engineer materials with a nozzle temperature up to 280°C . With a fully enclosed 220 x 220 x 220mm build volume, a heated bed capable of 110°C. This printer boasts a PEI build plate, an in and out circulating air filter.

BEST 3D Printer For Educators

Verified Customer Reviews

Based on 1 review Write a Review!

Adventurer 5M Pro

The Flashforge Adventurer 5M Pro is a highly capable high performance 3d printer which is capable of printing high speeds up to 600mm/s using high temperature engineer materials with a nozzle temperature up to 280°C . With a fully enclosed 220 x 220 x 220mm build volume, a heated bed capable of 110°C. This printer boasts a PEI build plate, an in and out circulating air filter. The Flashforge Adventurer 5M can print a large variety of materials and utilises a swapable extruder system which allows you to rapidly change between different nozzles based on your printing needs. Nozzle sizes are available in 0.25mm/ 0.4mm (standard)/ 0.6mm / 0.8mm. With a 280°C maximum nozzle temperature ensures this printer is capable of printing not only in standard materials such as PLA and PETG, but also engineering materials such as ABS and ASA. The hardened nozzles allow you to print in abrasive composite materials such a carbon and glass composite materials such as PLA-CF PETG-CF and PA-CF. You can also print in Flexible materials such as TPU. The Adventurer 5M is fast... very fast. With a standard print speed of 300mm/s and a maximum speed of 600mm/s, it is able to accelerate at 10,000-35,000mm/s2. Print speeds are significantly reduced at these speeds however print quality is maintained. Flashforge has developed high speed printing materials especially optimised to take advantage of this incredible speeds available here- The inclusion of the fully enclosed design, the 110°C heated bed, as well as the 50°C heated chamber combined with circulating air flow help control the warping of engineering materials ensuring dimensional accurate parts through minimised warping. A 4.3" touch screen, wi-fi connection and built in camera ensure you are always well as well informed and effortlessly able to communicate with the printer. The highly tuned FlashPrint slicing software ensures that your printer is well optimised for the various printing materials capable for this machine.

Ready Set Go

The Adventurer 5M Pro with its intuitive touch screen, automated calibration and one click start up. You can be ready to print in 10 minutes.

A 4.3" touch screen, wi-fi connection and built in camera ensure you are
always well as well informed and effortlessly able to communicate with
the printer. The highly tuned FlashPrint slicing software ensures that
your printer is well optimised for the various printing materials
capable for this machine.

Core XY Gantry

The Adventurer 5M Pro is engineered with a solid chassis utilising high quality rails and bearings.

The Core XY Gantry Design ensures the direct drive print head remains stable, high acceleration is achievable whilst maintaining dimensional accuracy and high print quality.

Rigid Core XY gantry ensures high speeds and acceleration

Vibration Compensation

The Adventurer 5M Pro is fast, very fast!Thanks to its rigid Core XY printing frame combined with high heating speed extruderand vibration compensation.

Print Speed up to 600mm/s

Acceleration up to 20000mm/s²

HEPA13 and Activated Carbon Filters

The Adventurer 5M Pro incorporated effective dual filtering of particulates and VOCs both within circulating chamber air as air extracted from the enclosure

Dual Air Flow Filtration

The Adventurer 5M Pro optimises air flow within the build chamber based on the requirements of the printing materials and print speed.

Fresh air circulation for conventional materials and high speed printing. PLA PETG etc.

Circulating chamber air for high temperature materials engineering materials to control warping and strengthen parts. For ABS ASA Nylon etc.enhanced cooling system with strong fans

Flashforge Adventurer 5M interchangable nozzle system

280°C Quick Release Nozzles

Swap a nozzle in 3 seconds!

Direct-Drive Extruder-

Adventurer 5M is equipped with a direct drive extruder, and the upgraded fast-heating nozzle improves the printing of flexible filament.Nozzles in various sizes can swapped out in seconds.

Large Selection of Printing Materials-

PLA/PETG/ TPU and high speed PLA/ PETG（0.4mm nozzles recommended）

ABS/ASA

PLA-CF/PETG-CF （ 0.6/0.8mm nozzles recommended）

Full Automatic Bed leveling

There is no need for leveling tools or manual calibration and adjustment of the Z-axis.

Effortlessly ensure a flawless first layer printing every time.

Advneturer 5M Pro multi point auto leveling

The magnetic remoable print surface is double sided

Double Sided PEI Print Surface

The removable magnetic print surface is coated in PEI and is removable from the printer.

3D Prints can easily be removed safely when cooled.

The bed is double sided, the underside can be used to print PETG whilst the top side can be used for materials such as PLA / ABS and TPU.

Amazing 3D printing for my classroom.

I just bought 2 of the new Adventurer 5M Pro printers and have given them a hefty workout I. The gliding weeks of the school term. I was amazed at the speed of prints, the ease of loading and changing filament and the software and file slicing. 3D Print Superstore matched other quotes and my order arrived very quickly. I’m looking forward to some exciting projects in the new year.

Like New

This printer is still running like brand new. Flawless work, flawless results. I've made a few projects into reality since the last time I reviewed this awesome machine. It's still performing excellently. No issues what-so-ever. The onboard digital screen is intuitive and lets me know if any potential problems could occur, like the outside temp is getting close to be too warm to print. That's awesome idea. In the next few weeks, I'll be giving the printer a service, lubricate all the moving parts, shafts, bearings etc, to ensure continues reliability. This printer is proving to be one of my finest decisions. Very pleased

great place to buy from! Very helpful :)

Love it!

Perfect for the classroom. Reliable and very fast.

Creality PETG

Creality PETG filaments are definately top quality and easy to print.

Adventurer 5M Pro

Verified Customer Reviews

Adventurer 5M Pro

Ready Set Go

Core XY Gantry

Vibration Compensation

HEPA13 and Activated Carbon Filters

Dual Air Flow Filtration

280°C Quick Release Nozzles

Full Automatic Bed leveling

Double Sided PEI Print Surface

Join us and subscribe...

Let customers speak for us