Voltivo Digital Caliper

An essential tool for 3D Printing is a good set of Digital Calipers.When 3d printing parts,  you need to measure printed models to verify the dimensional accuracy of your printer. Often 3d printing software will include calibration settings where you can dial in actual print sizes verses you CAD models. Another essential requirement is to measure the dimension of your filament. Once again you often add this measurement into slicing software. This is the best way to optimise print quality and dimensional accuracy of your printed parts.
Voltivo Digital Calipers are part of the essential 3d printing toolbox

Voltivo 3D Model Caliper are equipped with a hardened stainless steel frame with precision-ground jaws and uses high-quality digital capacitive encoders to measure model dimensions quickly and accurately.

Voltivo Digital Caliper measuring 3d printed parts

The included quality hard-case helps keep your caliper stored away safely when not in use, thus protecting this device from damage so you can enjoy accurate measurements for years to come.
Measurement increments: 0.01mm / 0.001 inch
Accuracy: 0.02mm / 0.001 inch up to 150mm
Measuring Range:  0mm – 150mm, 0 inch – 6 inch
Operating Temperature: 0°C - 40°C
Storage temperature: -10°C - 60°C
Relative Humidity: <80%
Display: High contrast 5-digit LCD, Display resolution of 0.01mm / 0.0005 inch
Hardcase Size: 244mm x 91mm x 27mm
Battery: 1.55 V Long-life LR44, with one spare provided