e3d Thermistor Cartridge

Sold Out $7.95 ex gst

As described well packaged and

As described well packaged and shipped fast

E3d thermistor cartridge

Good to see some genuine stock. This store is 1 only approved reseller's

E3d thermistor cartridge

Good to see some genuine stock. This store is 1 only approved reseller's

Works great

No issues but its a simple part.

Works great

No issues but its a simple part.

1 2

We are Australian Distributors of the infamous E3D V6 high performance full metal Hot Ends.

e3d thermistor | spare parts for 3d printers

A custom made thermistor encapsulated into an easy to use cartridge package.

Using our proven Semitec 104GT thermistors, which are then potted into a cylindrical copper cartridge with a high conductivity ceramic based adhesive. The legs are insulated with fibreglass sleeving, and terminated with a Molex Microfit 3.0 connector.

This is a heat break for a 1.75mm E3D Hot End

Cross sectional view through the three E3D V6 hot ends available. Left 1.75mm Universal, middle 3mm Direct, right 3mm Bowden.

There are three variations of the E3D V-6 Kit. If you wish to print with 1.75mm filament you can use the 1.75mm Kit is universally usable in both a 1.75mm direct drive extruder or a Bowden style extruder set-up.If you have a 3mm Filament 3D Printer, choose between the Direct Drive version or the Bowden style HotEnd as illustrated above.

This above cutaways show the internals of all three HotEnds. Left to Right: 1.75mm Universal, 3mm Direct, 3mm Bowden. - See more at: https://e3d-online.com/E3D-v6/Full-Kit/v6-1.75mm-Universal-Bowden#sthash.cOCmL0t2.dpuf