17HS1070-C5X GEared stepper motor for 3d printers

Geared Nema17 Stepper Motor

Sold Out $68.50 ex gst

The ultimate in torque for extruders and other applications these geared motors output around 120N-cm of torque which is over double that of our highest torque plain NEMA17. These use a 5.18:1 ratio planetary gearbox with all steel components. The output shaft is 8mm in diameter and has a flat on it for a grub screw to secure against to completely lock a drive gear onto the shaft. The motor also has a convenient connector and comes with a lead that plugs into that connector allowing for easy connection and removal of your extruder. Nearly equal to a Nema23 56mm Stepper Motor but only half the weight.

nearly equal to a Nema23 56mm Stepper Motor but only half the weight. - See more at: http://www.robotdigg.com/product/90/Geared+Nema17+Stepper+Motor#sthash.4czzzYFX.dpuf

17HS1070-C5X technical specification 17HS1070-C5X Stepper motor for 3d printer extruders

Specifications-

Nema 17 Stepper Motor 12 Volt Geared Motor 17HS1070-C5X

Item	Specification
Step Angle	1.8°
Step Angle Accuracy	±5% (full step,no load)
Resistance Accuracy	±10%
Inductance Accuracy	±20%
Temperature Rise	80°CMax.(rated current,2 phase on)
Ambient Temperature	-10°C~+50°C
Insulation Resistance	100MΩMin. 500VDC
Dielectric Strength	500VAC for one minute
Shaft Radial Play	0.06Max.(450 g-load)
Shaft Axial Play	0.08Max.(450 g-load)

Phase	Voltage	Current	Inductance	Resistance	Holding	Rotor	Weight	Length	Wire
No.	Voltage	Current	Inductance	Resistance	Torque	Inertia	Weight	Length	No.
	V	A	mh ±20%	Ω ±10%	mN.m	g.cm ²	kg	mm
2	2	1.3	2.4	1.56	260	38	0.2	61.3	4

Model Number	17HS1070-C5X
Holding Torque	120 N-cm
Gear Ratio	5.18:1 ratio planetary gearbox
Shaft	8mm with flat
Rated Voltage	3.1 volts
Lead Length	30cm
Gearbox Model Number	36PA5.18G

Hypa PLA Black

This product worked fine so far. it's not what I was supposed to get as I wanted PLA-CF. My only issue is the cardboard spools. I managed to get by by not using the AMS.

Fast postage ! Great service

A great intro device to 3D printing

I love it, the 5M pro, super easy to setup and use with default settings which allows you heaps of time to learn and adjust the device settings to maximise its output quality with out the frustraion of failed prints.

Great service

Mark was very helpful with advice on which printer to get and how to get started. Highly recommend.

Rainbow CR silk

Fantastic results with quality and even finish. Well worth it and will repurchase as soon as I finish this roll.

Geared Nema17 Stepper Motor

Customer Reviews

Customer Reviews

Let customers speak for us

Geared Nema17 Stepper Motor

Customer Reviews

Related Items

Recently Viewed

Customer Reviews

Join us and subscribe...

Let customers speak for us