Your Cart is Empty
Washing and Curing of 3D Prints is an essential part of the process of producing 3D Printed models on a UV curing resin 3D Printer.
Creality has provided an all in one solution to clean and cure resin models effectively and safely with the UW-03 Washing & Curing Machine.
When a model build in a resin print, the model is contaminated with uncured resin. It is essential that this is washed of the part prior to removing support structures.
Once supports are removed the models requires a final flash of UV rays to fully cure the resin- ensuring the model becomes fully set to remove any tackiness as well as increase the strength and durability of the part.
This will ensure that the model is safe to touch, dry and ready for painting if desired.
Wash Volume is 210 x 160 x 200mm (6.72 litres)
Cure Volume is 215 x 165 x 300mm (10.64 litres)
A powerful magnetic propeller stirs a vortex into the cleaning solution at 500r/min. It can rinse off stubborn resin residue in the tightest of nooks and crannies which can be especially tricky in miniatures and fine jewellery
You can choose Basket Wash Mode or Hang State Wash Mode,
The Hang state can fit built platforms up to 10.3 inch in size.
You can choose Basket Cure Mode or Conventional Cure Mode when curing UV models.
18 enhanced array 405nm UV LEDs genreratean intensity of light of over 20000 uW/cm² evenly as the turntable rotates the model providing an evenly solidified model.
Correctly cured model become stronger and more durable.
The tinted lid blocks 99.9% of UV light from escaping the curing chamber. A UV curing process will stop as soon as the lid is lifted prevent UV light from harming eyes.
