Your Cart is Empty
| Build Volume (W*D*H) | Single Nozzle Printing: 325*320*325 mm³ Dual Nozzle Printing: 300*320*325 mm³ Total Volume for Two Nozzles: 350*320*325 mm³ |
| Chassis | Aluminum and Steel |
| Outer Frame | Plastic and Glass |
| Physical Dimensions | 492*514*626 mm³ |
| Net Weight | 31 kg |
| Hotend | All Metal |
| Extruder Gear | Hardened Steel |
| Nozzle | Tungsten Carbide |
| Max Nozzle Temperature | 350 ℃ |
| Included Nozzle Diameter | 0.4 mm |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament Cutter | Built-in |
| Filament Diameter | 1.75 mm |
| Extruder Motor | Bambu Lab High-precision Permanent Magnet Synchronous Motor |
| Build Plate Material | Flexible Steel Plate |
| Included Build Plate Type | Textured PEI Plate |
| Supported Build Plate Type | Textured PEI plate, Smooth PEI Plate |
| Max Heatbed Temperature | 120 ℃ |
| Max Speed of Toolhead | 1000 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s² |
| Max Flow for Hotend | 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature) |
| Active Chamber Heating | Supported |
| Max Temperature | 65 ℃ |
| Pre-filter Grade | G3 |
| HEPA Filter Grade | H12 |
| Activated Carbon Filter Type | Granulated Coconut Shell |
| VOC Filtration | Superior |
| Particulate Matter Filtration | Supported |
| Part Cooling Fan | Closed Loop Control |
| Cooling Fan for Hotend | Closed Loop Control |
| Main Control Board Fan | Closed Loop Control |
| Chamber Exhaust Fan | Closed Loop Control |
| Chamber Heat Circulation Fan | Closed Loop Control |
| Auxiliary Part Cooling Fan | Closed Loop Control |
| Toolhead Enhanced Cooling Fan | Closed Loop Control |
| PLA, PETG, TPU, PVA, BVOH | Optimal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA | Superior |
| PPA-CF/GF, PPS, PPS-CF/GF | Ideal |
| Live View Camera | Built-in; 1920*1080 |
| Nozzle Camera | Built-in; 1920*1080 |
| Toolhead Camera | Built-in; 1920*1080 |
| Door Sensor | Supported |
| Filament Run Out Sensor | Supported |
| Filament Tangle Sensor | Supported |
| Filament Odometry | Supported with AMS |
| Power Loss Recovery | Supported |
| Voltage | 100–120 VAC / 200–240 VAC, 50/60 Hz |
| Max Power1 |
2200 W@220 V / 1320 W@110 V Please purchase the version corresponding to your region's voltage. |
10 ℃-30 ℃
| Touchscreen | 5-inch 720*1280 Touchscreen |
| Storage | Built-in 32 GB EMMC and USB Port |
| Control Interface | Touchscreen, mobile App, PC App |
| Motion Controller | Dual-core Cortex-M4 and Single-core Cortex-M7 |
| Application Processor | Quad-core 1.5 GHz ARM A7 |
| Neural Processing Unit | 2 TOPS |
| Slicer | Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported. |
| Supported Operating System | MacOS, Windows |
| Ethernet | Available |
| Wireless Network | Wi-Fi |
| Network Kill Switch | Wi-Fi and Ethernet |
| Removable Network Module | Available |
| 802.1X Network Access Control | Available |
| Operating Frequency | 2412–2472 MHz, 5150–5850 MHz (FCC/CE) 2400–2483.5 MHz, 5150–5850 MHz (SRRC) |
| Wi-Fi Transmitter Power (EIRP) | 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE) |
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n |
| Port Type | RJ45 |
| Speed | 100 Mbps Full-Duplex |
| Dimensions | 372*280*226 mm³ |
| Net Weight | 2.5 kg |
| Housing Material | ABS/PC |
| Filament Supported | PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF/PAHT-CF/PETG-CF/Support for PLA/PETG, and TPU for AMS |
| Filament Not Supported | TPE, generic TPU, PVA (damp), BVOH (damp), Bambu PET-CF/TPU 95A, and other filament that contains carbon fiber or glass fiber |
| Filament Diameter | 1.75 mm |
| Spool Dimension | Width: 50 mm–68 mm Diameter: 197 mm–202 mm |
| RFID Identification | Supported |
| Highest Temperature | 65 ℃ |
| Filament Supported2 | PLA, PETG, Support for PLA/PETG, ABS*, ASA*, PET*, PA*, PC*, PVA*, BVOH *, PP, POM*, HIPS*, Bambu PLA-CF*/ PAHT-CF*/ PETG-CF*, and TPU for AMS* |
| Active Moisture Discharge | Supported |
| Sealed Storage | Supported |
| Temperature and Humidity Detection and Maintenance | Supported. Real-time temperature and humidity can be displayed on the screen3, Bambu Studio, and Bambu Handy. |
| Input | 24 V 4 A |
| Dimensions | 114*280*245 mm³ |
| Net Weight | 1.21 kg |
| Housing Material | PC/PA |
| Flame Retardant Grade | UL 94 V-0 |
| Screen | Supports displaying real-time temperature and humidity, and remaining drying duration. |
| Filament Supported | Feeder Unit Filament Inlet: PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF/PAHT-CF/PETG-CF/Support for PLA/PETG, and TPU for AMS Bypass Filament Outlet: TPE, generic TPU, Bambu PET-CF/TPU 95A, and other filament that contains carbon fiber or glass fiber |
| Filament Not Supported | PVA (damp), BVOH (damp) |
| Filament Diameter | 1.75 mm |
| Spool Dimension | Width: 50 mm–68 mm Diameter: 197 mm–202 mm |
| RFID Identification | Supported |
| Filament Odometry | Supported |
| Maximum Temperature | 85 ℃ |
| Filament Supported | PLA, PETG, Support for PLA/PETG, ABS, ASA, PET, PA, PC, PVA, BVOH, PP, POM, HIPS, Bambu PLA-CF/ PAHT-CF/ PETG-CF, and TPU for AMS |
| Active Moisture Discharge | Supported |
| Rotating Drying Mode | Supported |
| Sealed Storage | Supported |
| Top Lid Open Detection | Supported |
| Temperature, Humidity Detection and Maintenance | Supported. Real-time information can be displayed on the printer screen3, AMS HT screen, Bambu Studio, and Bambu Handy. |
| Voltage | DC: 24 V AC: 100 V–240 V~, 50 Hz/60 Hz |
| Average Power | 150 W |
