Your Cart is Empty
This is the standard grey resin made by Flashforge, optimised for use on digital light processing (DPL) 3d printers using 405nm wavelength projectors only- such as the Flashforge Hunter.
It resin is NOT compatible with LCD printers such as the Flashforge FOTO Series of 3d printers.
This resin has been optimised for printing with low shrinkage and low warpage while preserving high detail.
| Density | 1.05 |
| Viscosity | 100 - 300 cps @ 25C |
| Tensile Strength | 30 MPa |
| Elongation at Break | 8% |
| Shore Hardness | 85 D |
| Exposure Ec | 6mj/cm^2 |
| Penetration Depth | 0.2mm/0.5ml |
| Colour | Grey |
| Size | 500 mL |
