The bracket that comes with the model may not fit the attachments on the X-axis, and you may need to print a piece to fit it.
I filled out the delivery instruction box for someone to call if I would need any extra brackets, it is my first printer so I didn't know exactly what to expect and they didn't call me. The thing is this would have been helpful to ensure I had the part made prior to the hot end arriving, my first printer and the other hot end sent to me was faulty. I ended up using a light piece of wood. Actually, while I'm at it, your phone doesn't work at all.
P
Peter E.
E3d V6 Lite
Perfect. Everything they say about how great they are is true.
We are Australian Distributors of the infamous E3D-Online high performance full metal Hot Ends.
e3D 3D printer Hot Ends are well regarded as one of the best full metal Hot Ends. The e3D Lite6 is a low cost alternative to the e3D V6. It offer the high performance and reliable performance the e3D is famous for but is restricted in the print speeds and temperature that it can print as. It has a partial PTFE lined Hot End so this means that there is a temperature limit of 240C. Lite6 is aimed at the more standard materials, such as ABS and PLA, and it really does produce beautiful looking prints with outstanding reliability.
Bsuitable for printing the widest range of print materials with excellent print results, allowing for soft flexible materials but restricted from higher temperature filaments such as polycarbonate and some
Lite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features.
Lite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features. - See more at: http://e3d-online.com/Lite6-1.75mm-Bowden#sthash.F0NYakOB.dpuf
Lite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features. - See more at: http://e3d-online.com/Lite6-1.75mm-Bowden#sthash.F0NYakOB.dpuf
Lite6 does not supersede v6 - more compliments it, think of Lite6 as v6’s little brother. It’s a lower cost hotend, with a more modest specification, but still a great option for beginners and those on a budget. Read on to find out the key differences and features. - See more at: http://e3d-online.com/Lite6-1.75mm-Bowden#sthash.F0NYakOB.dpuf
ComparisonChart
e3D V6
e3D Lite6
Max Temp
>400 Degrees Celsius
245 Degrees Celsius
Speed
20-100mm/s
20-50mm/s
Compatibility
Filament Diameter
1.75mm of 3mm
1.75mm
Bowden
Yes
Yes
Volcano
Yes
Yes
V6 Nozzles
Yes
Yes
Cross section through 3eD Lite6. Note that the PTFE tube runs further down the hot end compared to the e3D V6 Hot Ends displayed below.
Cross sectional view through the three E3D V6 hot ends. Left 1.75mm Universal, middle 3mm Direct, right 3mm Bowden.
What's in the box
Embedded Bowden Coupling (Universal for Direct & Bowden) HeatSink Heater Block 1.75 x 0.4mm Nozzle (interchangeable) Heater Cartridge Thermistor (Semitec 104GT2) Section of PTFE Fan Fan Duct All the fixings and wiring you need
This above cutaways show the internals of all three HotEnds. Left to Right: 1.75mm Universal, 3mm Direct, 3mm Bowden. - See more at: https://e3d-online.com/E3D-v6/Full-Kit/v6-1.75mm-Universal-Bowden#sthash.cOCmL0t2.dpuf
This above cutaways show the internals of all three HotEnds. Left to Right: 1.75mm Universal, 3mm Direct, 3mm Bowden. - See more at: https://e3d-online.com/E3D-v6/Full-Kit/v6-1.75mm-Universal-Bowden#sthash.cOCmL0t2.dpuf
The bracket that comes with the model may not fit the attachments on the X-axis, and you may need to print a piece to fit it.
I filled out the delivery instruction box for someone to call if I would need any extra brackets, it is my first printer so I didn't know exactly what to expect and they didn't call me. The thing is this would have been helpful to ensure I had the part made prior to the hot end arriving, my first printer and the other hot end sent to me was faulty. I ended up using a light piece of wood. Actually, while I'm at it, your phone doesn't work at all.
P
Peter E.
E3d V6 Lite
Perfect. Everything they say about how great they are is true.
Join us and subscribe...
We won't spam you (we hate spam!) We only send cool relevant info and exclusive offers...
Fired it up and decided to quickly print a benchy.
Wow! I couldn't stop checking it out. It only took 13 minutes and it is the best benchy I have ever printed. I have 5 Printers, including a Creality K1 Max and none of them came close to this one.
Since then it has been working its butt off and I am super impressed. I thought the K1 Max was unbeatable for the price but this is much better and less expensive.
Its print head heat range and chamber warming means you can print many different filaments making it much more versatile than most of its competitors and the ability to print multiple colours is coming in early 2025, meaning it will more than favourably compete with both the Creality K2 and the Bambu range, especially pricewise.
Really easy to set up and really easy to use. I recommend it whether you're a novice or running a print farm. You will definitely not be sorry you purchased this unit.
This product worked fine so far. it's not what I was supposed to get as I wanted PLA-CF. My only issue is the cardboard spools. I managed to get by by not using the AMS.
I love it, the 5M pro, super easy to setup and use with default settings which allows you heaps of time to learn and adjust the device settings to maximise its output quality with out the frustraion of failed prints.
