• Formbot T-Rex 2+ 500mm with IDEX (ex gst)

    Formbot

  • $2,399.00

  • ← Previous Product Next Product →
  • Share this product

Description

Introducing a new era of 3d printing. The Formbot T-Rex 2+ large format 3D Printer with Independent Dual Extruders (IDEX), 225 point automatic unified bed leveling with dual zone bed heating.

Formbot T-Rex 2+ with the Massive Build Size 3D Printer 400 x 400 x 500mm

The next generation of high performance 3D printer constructed with the high quality components which incorporates the latest technology in 3D printing. Available in two heights. This is the 500mm version. The 700mm version can be found here.

The Formbot T-Rex 2+ 500 is a seriously big printer! With a build volume of 400 x 400 x 500 mm, you get a huge 80 litres of area to print in! 
Assembled out of high quality components, the Formbot T-Rex 2+ 500 uses incredibly thick linear rail and bearing to ensure smooth movement, and industrial ball screws to attain incredible z accuracy. 
Built with independent dual extruders allows the Formbot T-Rex 2+ 500 to print in more ways so suit your requirements! Print with two materials for soluble support, dual colours, or print two objects at the same time for twice the printing speed! 

Print bigger

With 80,000 cubic centimetres of volume, the Formbot T-Rex 2+ 500 has three times the build volume of the Raise N2 for half the price, and over eight times the volume of the Ultimaker 3! 

Never be constrained by your build volume again, and print big!

printer size comparison formbot raise raise3d bcn3d ultimaker makerbot leapfrog flashforge

 

Dual Independent Extruder (IDEX)

With two independent extrusion nozzles, the Formbot T-Rex 2+ 500 can print two materials at once with no oozing and no damage to the model, a feature unique to the Formbot among printers this big!

With two independent extruder heads, you can print a model with two colours, a model with two materials, a model with soluble supports, or two of the same model at the same time! 

formbot t-rex 2+ 3d printer melbourne australia soluble dissolvable supports structures raise raise3d

Printing with PVA supports that dissolve in water has never been easier with the Independent Extruder System of the Formbot T-Rex2+.

The Formbot TRex2+ can print complex models using soluble support structures. In this video, e3D Scaffold is being used in conjunction with PLA to print this bike helmet prototype. The IDEX system ensures a clean print without contamination as the independent print heads dock themselves in the cleaning stations when not in use. Then wipe themselves clean prior to printing.

 

Bike Helmet 3d printer with Scaffold e3d scaffold PVA soluble support

Ideal  for designers and engineers. This is a 3D Print of a 1:1 complex prototype model of a bicycle helmet. The IDEX independent dual extruder system enables the Formbot TRex2+ to print complex 3d models. The grey PVA support material can be easily removed by soaking the part in water, leaving a perfectly 3d printer part.

Multi material 3d printing with the Formbot TRex2+ with IDEX

True multi material 3d printing is here thanks to the Formbot IDEX extruder system. This screw driver handle prototype was 3D printed using a hard PLA material combined with a Flexible Rubber TPU to simulate in-mold decoration of injection molding parts. The Formbot can print these without the need of a prime tower or ooze shield thanks to the IDEX extruder system which wipes nozzles clean whilst the are docked away between uses.

Large Format 3D Printing with the Formbot TRex2+

The Formbot TRex2+ is ideal for prop builders and cosplay enthusiasts with it's massive build volume and print quality.

Formbot TRex2+ Prop building with 3d printers

Expand your creative freedom with the capacity to build larger than life models with the TRex2+ like this creepy Halloween prop, ready to pounce!

Print hotter

With an independent heat bed, the Formbot T-Rex 2+ 500 can reach 120 degrees across the entire 400 x 400 build plate in mere minutes! Plugging into the wall, the heat bed has dual zones of heating, allowing you to heat the entire plate, or just the center if you're printing a smaller object. 

formbot t-rex 2+ 3d printer melbourne australia heated bed raise raise3d

At the 3D Printer Superstore we bundle all T-Rex2+ printers with the upgrade 400 x 400mm aluminum dual zone heated print bed as standard. This ensured maximum adhesion to the print bed for large prints.

formbot t-rex 2+ metal heat bed 3d printer melbourne australia raise raise3d

The build surface includes a high powered KEENOVO silicon heating pad with dual zone heating up to 120 degrees Celsius within a couple of minutes. This heating pad includes an independent Digital Controller that enables you to just heat the central 200x200mm region for smaller prints or heat the full 400x400mm zone for larger builds.

Print level

With an integrated BL Touch sensor, the Formbot T-Rex 2+ 500 takes an incredible 225 reference points of the bed, creating a leveling mesh that ensures your print is perfectly aligned to the bed of the Formbot without all that tedious mucking about with levelling. 

With the newly added babystepping, it's easier than ever to fine tune your printer to your exacting needs, without the stress! 

formbot t-rex 2+ bltouch autolevel sensor 3d printer melbourne australia nozzle raise raise3d

To ensure the cleanest of prints, when not in use the print heads park themselves in bays with a tray to catch oozing, and a wire brush to clean the nozzle every time it's used. 

Print Customised 

With quick interchangeable hot ends, it's cheaper and easier to print exactly how you want. Put on a 0.25mm nozzle for super high detail, or up to a 1.0mm nozzle to print faster. Not just limited to brass, all the nozzle sizes also come in steel, allowing you to print any exotic filaments you wish with ease. formbot t-rex 3d printer nozzle australia melbourne filament raise raise3d

 

Print reliably 

Built with high end components, the Formbot T-Rex 2+ 500 hasn't cut corners with build quality. Genuine Meanwell power supply, BLTouch sensor, Keenovo heat bed, NSK bearings, and properly processed aluminium extrusion ensures that your printer prints reliably and beautifully. 

Print big. Without the hassle. 

Print Precision

The Z-Axis of Formbot T-Rex2+ is constructed with high quality industrial grade 20mm trapezoidal linear rails in conjunction with dual 12mm TBI Motion Ball Screws.

This ensures smooth motion, high precision auto leveling and durability and ultimately exceptional print quality.

TBI Motion Ball Screws ensure the highest quality 3d printing

The Formbot TRex2+ uses dual 12mm TBI motion ball screws for Z axis motion ensuring precise motion and exceptional print quality.

 TBi motion ball screws

This cross section shows the Groove Shape of the TBI Motion precision Ball Screws. The High efficiency of balls screws are vastly superior to conventional screws with smoother motion and minimal axial play.

 

What You Tubers have to say-

 

Specifications

Print volume / build size (X,Y,Z) 80 litres (400 x 400 x 500)   
mm
Frame size (X,Y,Z) 700 x 630 x 550 mm
Resolution (Z-AXIS) 0.05 - 0.5   mm
Accuracy (Theoretical positioning resolution) Z axis 0.0025, XY axis 0.011 mm
Print Speed 40-180 mm/sec
Total mass 21 kg
Nozzle diameter 0.4 (standard), 0.25, 0.6, 0.8, 1.0 mm
Nozzle Flow Velocity 24 cc/hr
Filament Diameter 1.75 mm
Filament Material ABS, PLA, PVA, HIPS, Nylon etc  
Slicing Software Cura, Simplify3D  
OS Support Windows 7, Linux, Mac OX  
Print without PC Yes with SD card (included) or USB link  
Heated Bed included  Yes up to 120 
Power Consumption 220V, 350W  
Extruder Heads included 2 Indepentant  
Comes with 12 Months Extended Replacement Parts Warranty

 

formbot t-rex 2+ 3d printer melbourne australia exclusive distribution 3d printer superstore