• Formbot T-Rex 2+ 700mm with IDEX (ex gst)

    Formbot

  • 19 Reviews ( 4.9 )
  • $2,929.00

  • Next Product →
  • Share this product

Description

Introducing a new era of 3d printing. The Formbot T-Rex 2+ large format 3D Printer with Independent Dual Extruders (IDEX), 225 point automatic unified bed leveling with dual zone bed heating.

formbot t-rex 2+ dual printer 3D printer melbourne australia large raise

The next generation of high performance 3D printer constructed with the high quality components which incorporates the latest technology in 3D printing. Available in two heights. This is the 700mm version. The 500mm version can be found here.

The Formbot T-Rex 2+ 700 is a seriously big printer! With a build volume of 400 x 400 x 700 mm, you get a huge 112 litres of area to print in!  
Assembled out of high quality components, the Formbot T-Rex 2+ 700 uses incredibly thick linear rail and bearing to ensure smooth movement, and industrial ballscrews to attain incredible z accuracy.  
Built with independent dual extruders allows the Formbot T-Rex 2+ 700 to print in more ways so suit your requirements! Print with two materials for soluble support, dual colours, or print two objects at the same time for twice the printing speed! 

Print bigger

With 112,000 cubic centimetres of volume, the T-Rex 2+ 700 has twice the build volume of the Raise N2+ for half the price, and and nearly three times the build volume of the Makerbot Replicator Z18! 

Never be constrained by your build volume again, and print big!

printer size comparison formbot raise bcn3d ultimaker makerbot leapfrog flashforge

 

Print dual

With two independent extrusion nozzles, the Formbot T-Rex 2+ 700 can print two materials at once with no oozing and no damage to the model, a feature unique to the Formbot among printers this big!

With two independent extruders, you can print a model with two colours, a model with two materials, a model with soluble supports, or two of the same model at the same time! 

formbot t-rex 2+ 3d printer melbourne australia soluble dissolvable supports structures raise raise3d

Print hotter

With an independent heat bed, the Formbot T-Rex 2+ 700 can reach 100 degrees across the entire 400 x 400 build plate in mere minutes! Plugging into the wall, the heat bed has dual zones of heating, allowing you to heat the entire plate, or just the centre if you're printing a smaller object. 

Originally offered as an extra upgrade, the full metal heat bed is now included with every one of our Formbot T-Rex 2+ printers, making your larger prints more reliable than ever before.

formbot t-rex 2+ metal heat bed 3d printer melbourne australia raise raise3d

Print level

With an integrated BL Touch sensor, the Formbot T-Rex 2+ 700 takes an incredible 225 reference points of the bed, creating a levelling mesh that ensures your print is perfectly aligned to the bed of the Formbot without all that tedious mucking about with levelling. 

With the newly added babystepping, it's easier than ever to fine tune your printer to your exacting needs, without the stress! 

formbot t-rex 2+ bltouch autolevel sensor 3d printer melbourne australia nozzle raise raise3d

To ensure the cleanest of prints, when not in use the print heads park themselves in bays with a tray to catch oozing, and a wire brush to clean the nozzle every time it's used. 

Print customised 

With quick interchangeable hot ends, it's cheaper and easier to print exactly how you want. Put on a 0.25mm nozzle for super high detail, or up to a 1.0mm nozzle to print faster. Not just limited to brass, put a high strength stainless steel nozzle to print exotic filaments without hassle. 

formbot t-rex 3d printer nozzle australia melbourne filament raise raise3d

 

Print reliably 

Built with high end components, the Formbot T-Rex 2+ 700 hasn't cut corners with build quality. Genuine Meanwell power supply, BLTouch sensor, Keenovo heat bed, NSK bearings, and properly processed aluminium extrusion ensures that your printer prints reliably and beautifully. 

Print big. Without the hassle. 

 

 

Specifications

Print volume / build size (X,Y,Z) 112 litres (400 x 400 x 700)   
mm
Frame size (X,Y,Z) 700 x 630 x 750 mm
Resolution (Z-AXIS) 0.05 - 0.5   mm
Accuracy (Theoretical positioning resolution) Z axis 0.0025, XY axis 0.011 mm
Print Speed 40-180 mm/sec
Total mass 21 kg
Nozzle diameter 0.4 (standard), 0.25, 0.6, 0.8, 1.0 mm
Nozzle Flow Velocity 24 cc/hr
Filament Diameter 1.75 mm
Filament Material ABS, PLA, PVA, HIPS, Nylon etc  
Slicing Software Cura, Simplify3D  
OS Support Windows 7, Linux, Mac OX  
Print without PC Yes with SD card (included) or USB link  
Heated Bed included  Yes up to 120 
Power Consumption 220V, 350W  
Extruder Heads included 2  
Comes with 12 Months Extended Replacement Parts Warranty

 formbot t-rex 2+ 3d printer melbourne australia exclusive distribution 3d printer superstore