The ultimate in torque for extruders and other applications these geared motors output around 120N-cm of torque which is over double that of our highest torque plain NEMA17. These use a 5.18:1 ratio planetary gearbox with all steel components. The output shaft is 8mm in diameter and has a flat on it for a grub screw to secure against to completely lock a drive gear onto the shaft. The motor also has a convenient connector and comes with a lead that plugs into that connector allowing for easy connection and removal of your extruder. Nearly equal to a Nema23 56mm Stepper Motor but only half the weight.
Specifications-
Nema 17 Stepper Motor 12 Volt Geared Motor 17HS1070-C5X
Item | Specification |
Step Angle | 1.8° |
Step Angle Accuracy | ±5% (full step,no load) |
Resistance Accuracy | ±10% |
Inductance Accuracy | ±20% |
Temperature Rise | 80°CMax.(rated current,2 phase on) |
Ambient Temperature | -10°C~+50°C |
Insulation Resistance | 100MΩMin. 500VDC |
Dielectric Strength | 500VAC for one minute |
Shaft Radial Play | 0.06Max.(450 g-load) |
Shaft Axial Play | 0.08Max.(450 g-load) |
Phase | Voltage | Current | Inductance | Resistance | Holding | Rotor | Weight | Length | Wire |
No. | Torque | Inertia | No. | ||||||
V | A | mh ±20% | Ω ±10% | mN.m | g.cm ² | kg | mm | ||
2 | 2 | 1.3 | 2.4 | 1.56 | 260 | 38 | 0.2 | 61.3 | 4 |
Model Number | 17HS1070-C5X |
Holding Torque | 120 N-cm |
Gear Ratio | 5.18:1 ratio planetary gearbox |
Shaft | 8mm with flat |
Rated Voltage | 3.1 volts |
Lead Length | 30cm |
Gearbox Model Number |
36PA5.18G |
We won't spam you (we hate spam!) We only send cool relevant info and exclusive offers...